이 단계의 변경 사항
편집자 Jorden Walke-
편집 승인됨 완료자 Jorden Walke
- 이전
- 이후
- 변경 사항 없음
단계 라인
[* black] Place the brake disc onto the hub and tighten it with a screwdriver or drill. | |
[* icon_note] Make sure the disc brake is facing upwards when screwing back on | |
[* icon_note] M5 x 10mm Bicycle Rotor Screw T25 | |
+ | [* red] These are the screws that are inserted into the disc. There should be 6 screwed back in. |