주요 콘텐츠로 건너뛰기

#8 단계의 변경 사항

Walter Galan- 에 의해 수정

편집 승인됨 에 의해 Walter Galan

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_caution] '''Be very careful''' not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.
[* icon_note] Flip the top of the power supply towards you, like opening a mailbox,you to give access to the DC power cable connection behind the logic board.
[* black] Squeeze the DC power cable connector tab and pull it straight out of its socket on the back of the logic board.
[* icon_note] Flip the top of the power supply towards you, like opening a mailbox,you to give access to the DC power cable connection behind the logic board.
[* black] Squeeze the DC power cable connector tab and pull it straight out of its socket on the back of the logic board.