주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

편집자 Manuel Haeussermann-

편집 승인됨 완료자 Manuel Haeussermann

이전
이후
변경 사항 없음

단계 라인

[title] Pry up the core assembly
[* icon_note] The core assembly is held in place by plastic clips.
-[* black] Insert the flat end of a spudger between the core assembly and the back cover.
+[* black] Insert the flat end of a spudger in the opening between the right edge of the core assembly and the back cover.
[* black] Pry the core assembly up.