| + | [title] taking out the speaker |
|---|
| + | [* black] using your philips head screwdriver, unscrew the 6 screws holding the speaker assembly in place. |
|---|
| + | [* black] using your heat gun, apply heat to the edges to again soften the adhesive seal. |
|---|
| + | [* black] using your flat head screwdriver, carefully pry up into the speaker's body. |
|---|
| + | [* icon_caution] be very careful when prying, as the speaker is still attached to wires on the motherboard. |
|---|
| + | [* black] when separating the speaker, carefully pull on the connectors on it |
|---|
| + | [* black] when putting the speaker assembly back together, again, replace the adhesive on the speaker and body. |
|---|