물건을 수리하세요 커뮤니티 상점

#8단계의 변경 사항

편집자 Harsh Mishra-

편집 승인됨 완료자 Harsh Mishra

이전
이후
변경 사항 없음

단계 라인

[* icon_caution] ***Caution! The temperature of the soldering iron is 450 degrees Fahrenheit. Do not apply melted soldering alloy for more than 15-20 seconds of time intervals.***
[* icon_caution] ***Do not touch the tip of the Soldering iron directly onto the battery. Only apply melted solder alloy onto the battery contact tab.***
-[* black] Apply Soldering paste on the battery contact tab and then melt solder alloy on to the tip of the soldering iron and touch the tip of the soldering iron to one of the 4 specified battery contact tab. Repeat this step for the other 3 battery contact tabs.
-[* black] Now place the new batteries on the battery holder attaching them to the soldered battery contact tabs. Apply some more soldering iron alloy if the batteries do not feel rigid on the holder.
+[* black] Re-Solder the Battery onto each one of the contact tabs.
+[* black] Apply Soldering paste on the battery contact tab and then melt solder alloy on to the tip of the soldering iron and touch the tip of the soldering iron to one of the 4 specified battery contact tab. Repeat this step for the other 3 battery contact tabs. Apply some more soldering iron alloy if the batteries do not feel rigid on the holder.