물건을 수리하세요 커뮤니티 상점

#8단계의 변경 사항

편집자 Connor-

편집 승인됨 완료자 Connor

이전
이후
변경 사항 없음

단계 라인

-[* icon_caution] ***Caution! The temperature of the soldering iron is 450 degrees Fahrenheit. Do not apply melted soldering alloy for more than 15-20 seconds of time intervals.***
-[* icon_caution] ***Do not touch the tip of the Soldering iron directly onto the battery. Only apply melted solder alloy onto the battery contact tab.***
+[* icon_caution] Caution! The temperature of the soldering iron is 450 degrees Fahrenheit. Do not apply melted soldering alloy for more than 15-20 seconds of time intervals.
+[* icon_caution] Do not touch the tip of the Soldering iron directly onto the battery. Only apply melted solder alloy onto the battery contact tab.
[* black] Ensure that the positive and negative electrodes are correctly identified and now place the new batteries onto the battery holder.
[* black] Apply Soldering paste on the battery contact tab and then melt solder alloy on to the tip of the soldering iron and touch the tip of the soldering iron to one of the 4 specified battery contact tab. Repeat this same step for the other 3 battery contact tabs. Apply some more soldering iron alloy if the batteries do not feel rigid on the holder.