물건을 수리하세요 커뮤니티 상점

#1단계의 변경 사항

편집자 Manuel Haeussermann-

편집 승인됨 완료자 Manuel Haeussermann

이전
이후
변경 사항 없음

단계 라인

[title] Pry up the midframe assembly
-[* black] Insert the flat end of a spudger in the rectangular gap between the midframe assembly and back housing, near the inner edge of the left bumper.
-[* black] Twist the spudger to release the left side of the midframe assembly from the back housing.
-[* black] Repeat the procedure on the gap near the right bumper to completely release the midframe assembly.
+[* black] Insert the flat end of a spudger into the rectangular gap between the midframe assembly and back housing, nearest the left bumper.
+[* black] Twist the spudger to partially release the midframe assembly.
+[* black] Repeat this prying procedure on the gap near the right bumper to completely release the midframe assembly.