주요 콘텐츠로 건너뛰기

#30 단계의 변경 사항

Jeff Snyder- 에 의해 수정

편집 승인됨 에 의해 Jeff Snyder

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Blast the front panel with heat and pry between the display assembly and front panel bezel, working one or several guitar picks around the display assembly.
[* black] Once the display assembly is loosened from the front panel, it will fall away.
[* blue] The front glass came off easily, but the digitizer was much more difficult to remove. The adhesive holding together the display assembly is much weaker than the adhesive holding the display assembly to the front panel.
[* icon_note] While creating this guide, I utterly destroyed the front panel bezel and digitizer. Replacing the display assembly was a breeze--but removing the digitizer required nearly a dozen reheats of the front panel. To replace the bezel, you will need a new "mid chassis" (that's the front panel piece the digitizer is so powerfully glued to).

이미지 1

이전 이미지가 없습니다

추가

이미지 2

이전 이미지가 없습니다

추가