주요 콘텐츠로 건너뛰기

#6단계의 변경 사항

Jake Devincenzi- 에 의해 수정

편집 승인됨 완료자 Jake Devincenzi

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Lift the display for enough clearance to disconnect the LCD thermal sensor cable connector from its socket on the logic board.
-[* icon_note] If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable. The thermal sensor connector socket is very fragile so be very careful when you connect back the sensor cable!
+[* icon_note] If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable. The thermal sensor connector socket is very fragile, so be very careful when you connect back the sensor cable.