주요 콘텐츠로 건너뛰기

이 단계의 변경 사항

Scott Dingle- 에 의해 수정

편집 승인됨 에 의해 Scott Dingle

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_caution] Before disconnecting the thermal sensor cable, take note of its orientation. It is extremely important to reinstall the connector in the current orientation so the fans will not run at full speed. If you have multiple pins on your replacement hard drive, put the connector closest to the SATA connections and closest to the PCB board.
[* black] Disconnect the thermal sensor, SATA power, and SATA data cables by pulling their connectors away from the sockets on the hard drive.
[* icon_reminder] When plugging the thermal sensor connector back into the hard drive, be sure it is inserted onto the set of pins closest to the SATA connectors and that the black wire of that connector is closest to the LCD.