#6단계의 변경 사항
편집자 TUOYO FABIYI-
편집 승인됨 완료자 TUOYO FABIYI
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Carefully place the fan plastic back |
|---|---|
| - | [* black] Then take the plastic plate with your screws. Make sure the screws align with the holes on the fan motor, then proceed to screw. |
| - | [* black] leave the machine oil for about 5 Minutes. |
| + | [* black] Carefully place the plastic plate properly on the surface of the fan rotor. |
| + | [* yellow] Make sure the screws align with the holes on the fan motor, then proceed to screw. |