주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#4단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Insert the tip of a spudger under the vibrator to free it from the adhesive holding it to the display assembly.
[* icon_caution] Be careful not to immediately remove the vibrator, as its cable is also adhered to the rear of the display assembly.
[* black] Use the tip of a spudger to pry the vibrator cable up from the display assembly.
[* blackicon_note] Heat works as a great "persuader" here to soften the adhesive. Liberal application of heat from a heat gun will soften the adhesive. If you pry carefully, you can save and re-use the adhesive.
[* blackicon_note] Heat works as a great "persuader" here to soften the adhesive. Liberal application of heat from a heat gun will soften the adhesive. If you pry carefully, you can save and re-use the adhesive.