#6단계의 변경 사항
편집자 Spencer Day-
편집 승인됨 완료자 Spencer Day
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [title] Insert an opening pick | |
| [* black] Wait one minute for a gap to form between the screen and frame. | |
| [* icon_note] If the adhesive doesn't separate, twist the handle clockwise ***one quarter turn*** and wait another minute. Apply more heat if the screen cools down. | |
| [* black] Insert an opening pick into the gap. | |
| [* icon_caution] Don't insert your opening pick more than ***3 mm*** to avoid damaging the spring contacts. | |
| [* black] Pull the blue handle backwards to unlock the arms and remove the Anti-Clamp using the pull tabs on the suction cups. | |
| - | [* black] *** |
| + | [* black] ***Skip the next two steps***. |