물건을 수리하세요 커뮤니티 상점

#6단계의 변경 사항

편집자 Ben-

편집 승인됨 완료자 Ben

이전
이후
변경 사항 없음

단계 라인

[* black] Remove the six 6.2 mm screws using a Phillips #00 screwdriver
[* black] Remove the 2.3 mm screw located above the game cartridge slot with a Phillips #00 screwdriver.
-[* black] Make sure the SD card has been removed. With a plastic opening tool pry off the lower case starting at the bottom edge and working around the perimeter.
+[* black] With a plastic opening tool pry off the lower case starting at the bottom edge and working around the perimeter.
[* black] Two ribbon cables connect the case to the circuit board. Be careful to not pull the case too hard and rip the ribbon cables.