메인 컨텐츠로 가기

#2 단계의 변경 사항

Noel- 에 의해 수정

승인 대기 중

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* icon_caution] The upperlower case is constructed of rubber-coated aluminum. Do not excessively bend the aluminum during removal, as any permanent deformation will cause tolerance issues after reassembly.
[* icon_caution] The upperlower case is constructed of rubber-coated aluminum. Do not excessively bend the aluminum during removal, as any permanent deformation will cause tolerance issues after reassembly.
[* black] Slightly lift the lower case near the vent opening.
[* black] Continue running your fingers between the lower and upper cases until the upper case pops off its retaining clips.
[* icon_note] The location of these three clips is shown in the third picture.