#4단계의 변경 사항
편집자 Anthony Romaniello-
편집 승인됨 완료자 Anthony Romaniello
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Use a wire striper (any kind works as long as there is a hole that is small enough to strip the wire while holding it down) to cut and remove the plastic cover of the wire. | |
| - | [* black] Make sure that you have a clean edge |
| + | [* black] Make sure that you have a clean edge (only the wire) so that you can create brand new connections. |