물건을 수리하세요 커뮤니티 상점

#8단계의 변경 사항

편집자 Bill Gilbert-

편집 승인됨 완료자 Bill Gilbert

이전
이후
변경 사항 없음

단계 라인

+[title] Test the inlet valve assembly
[* icon_note] If you have a multimeter, you can use it to test the inlet valve assembly components.
[* icon_note] Set the multimeter to the ohm (Ω) setting.
-[* black] For the first solenoid, test the resistance between the red and blue wires on the white connector.
+[* black] For the first solenoid, test the resistance between the wires from it at the connector.
[* icon_note] The acceptable resistance is 360 to 420 Ω.
-[* black] Repeat the test on the yellow connector for the other solenoid.
+[* black] Repeat the test on the connector for the other solenoid.
[* icon_note] The acceptable resistance is 360 to 420 Ω.
-[* black] To test the flow meter, test the resistance between the red and black wires on the white connector.
+[* black] To test the flow meter, test the resistance between the wires from it at the connector.
[* icon_note] The acceptable resistance is 4 kΩ to 30 kΩ.