물건을 수리하세요 커뮤니티 상점

#5단계의 변경 사항

편집자 NorthernBigDummy-

편집 승인됨 완료자 NorthernBigDummy

이전
이후
변경 사항 없음

단계 라인

[title] Remove D5 Capacitor
-[* black] I used a soldering gun to and wick to remove as much solder from back side of board where D5 is marked.
+[* black] I used a soldering gun to wick and to remove as much solder from back side of board where D5 is marked.
[* black] After solder is removed, I gently bent the capacitors pins so they were straightened and ready to remove from hole.
-[* black] Adding flux to the board, heated the pins and use a [product|IF145-020|tweezers] to pull on the D5 capacitor.
+[* black] Add flux to the board, heat the capacitor's pins, and use a [product|IF145-020|tweezers] to pull on the D5 capacitor.