#2단계의 변경 사항
편집자 Sam Goldheart-
편집 승인됨 완료자 Sam Goldheart
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* black] If the heat sink seems to be stuck to the logic board after removing all four screws, use a spudger to carefully separate the heat sink from the faces of the CPU. |
|---|---|
| + | [* black] Remove the heat sink from the logic board. |
| + | [* black] When reinstalling the heat sink, be sure to apply a new layer of [product|IF179-010|thermal paste]. If you have never applied thermal paste before, we have a [guide|744|guide] that makes it easy. |
이미지 1
이전 이미지 없음
추가