주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#17단계의 변경 사항

evandove- 에 의해 수정

편집 거부됨 완료자 Jeff Suovanen

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Open your MacBook so the display is perpendicular to the upper case.
[* black] Place your opened MacBook on a table as pictured.
[* red] While holding the display and upper case together with your left hand, remove the remaining T8 Torx screw from the lower display bracket. Torx screws could be T9 and not T8. Be sure your Torx driver fits snugly into the screw so that you don't strip it.
[* red] While holding the display and upper case together with your left hand, remove the remaining T8 Torx screw from the lower display bracket. Torx screws could be T9 and not T8. Be sure your Torx driver fits snugly into the screw so that you don't strip it.
[* black] Before retightening the T8 Torx screws, close the display and adjust it so that the back edges of the upper case and display are aligned and the gaps at the ends of the hinge are equal.