물건을 수리하세요 커뮤니티 상점

#1단계의 변경 사항

편집자 iRobot-

편집 승인됨 완료자 iRobot

이전
이후
변경 사항 없음

단계 라인

[title] Remove the charging board cover
[* icon_caution] Be very careful not to puncture the battery with your screwdriver.
[* red] Use a Phillips screwdriver to remove the seven 3.6 mm‑long screws securing the charging board cover.
- [* icon_note] The screw near the center of the bottom edge is covered by a sticker. Pierce through it with your screwdriver, or use tweezers to remove it.
+ [* icon_note] The screw near the center of the bottom edge is covered by a sticker. Pierce through it with your screwdriver, or use [product|IF145-020|tweezers] to remove it.