주요 콘텐츠로 건너뛰기

#7단계의 변경 사항

편집자 Spencer Day-

편집 승인됨 완료자 Spencer Day

이전
이후
변경 사항 없음

단계 라인

-[* black] Remove the battery and its sleeve.
+[* black] Remove the battery and its film.
[* icon_reminder] During reassembly:
[* black] If you're reusing the original battery:
[* icon_caution] ''***Never reuse a damaged or deformed battery***''—it's a potential safety hazard. If the battery is bent, deformed, or damaged ''in any way'', replace it with a new battery.
- [* black] If the plastic battery sleeve was damaged during removal, ''carefully'' remove it—be very cautious not to bend or damage the battery in any way. Apply a new sleeve to the battery, making sure the tabs go on the left edge.
+ [* black] If the plastic battery film was damaged during removal, ''carefully'' remove it—be very cautious not to bend or damage the battery in any way. Apply new film to the battery, making sure the tabs go on the left edge.
[* black] Remove the [link|https://guide-images.cdn.ifixit.com/igi/F52p2C5HEAqiaddf.full|two large plastic liners|new_window=true] from the outer edges of the battery recess to expose the adhesive.
[* black] Firmly press the battery into its recess so the cable is on the top edge.