#1단계의 변경 사항
편집자 Jonathan Nakamura-
편집 승인됨 완료자 Jonathan Nakamura
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Align chain tool with one of the pins on the chain as shown | |
| - | [* black] Twist the handle of the chain tool in the |
| + | [* black] Twist the handle of the chain tool in the clockwise direction to push the driving pin (of the chain tool) into the pin on the chain. This will begin to push the chain pin out |
| [* icon_note] Be careful not to push the pin all the way out, as this will make it very difficult to re-assemble the chain once you're done cleaning | |
| [* black] Separate the two links that were joined by that pin once the chain pin is pushed out of the inner link (but not out of the outer link). | |
| [* black] Pull the chain completely off of the chain rings |