메인 콘텐츠로 스킵하기

#7 단계의 변경 사항

Shereen- 에 의해 수정

편집 승인됨 에 의해 Andrew Optimus Goldheart

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Replacing the screen requires following the steps in reverse. Mating the flex cable from the new screen into the zif connector takes a bit of precise tweezer work.
[* black] The black tab that holds down the flex cable has lifted up from when the old flex cable was removed. SoMake sure the black swinging latch is still up! Now slide the new flex cable into the zif connector. Make sure it slides allis lined up properly and lays flat up under the way in. Thenblack latch. Then, using the tweezers push down the black tab down onto the flex cable.
[* black] The black tab willshould now be flush against the flex cable andto hold the flex cable in place and give proper contact for your screen to function properly!
[* black] The black tab that holds down the flex cable has lifted up from when the old flex cable was removed. SoMake sure the black swinging latch is still up! Now slide the new flex cable into the zif connector. Make sure it slides allis lined up properly and lays flat up under the way in. Thenblack latch. Then, using the tweezers push down the black tab down onto the flex cable.
[* black] The black tab willshould now be flush against the flex cable andto hold the flex cable in place and give proper contact for your screen to function properly!
[* black] Cover the hole with tape or the black tab that was originally there in order to keep dust out