#2단계의 변경 사항
편집자 Sarah Westberg-
편집 승인됨 완료자 Sarah Westberg
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Using the same switch you used for the battery, push it to the right to release the L-shaped panel, then remove the panel from the laptop. |
|---|---|
| - | [* icon_note] You may need to use a pry tool to remove the L-shaped panel. |
| - | [* icon_reminder] When reassembling the device, make sure to start by inserting the bottom of the panel first (see Image 3). |
| + | [* black] Push the same sliding latch to the right to release the L-shaped panel. |
| + | [* black] Remove the panel from the laptop. |
| + | [* icon_note] You may need to use a spudger to pry out the L-shaped panel and release any clips before removing it. |
| + | [* icon_reminder] When reassembling the device, make sure to start by inserting the bottom of the panel first (see image 3). |