물건을 수리하세요 커뮤니티 상점

#6단계의 변경 사항

편집자 Jake M.-

편집 승인됨 완료자 Jake M.

이전
이후
변경 사항 없음

단계 라인

-[* red] Use the Phillips #0 Screwdriver to remove the 4 4mm screws on the side of the drive cage.
+[* red] Use a Phillips #0 screwdriver to remove the four 4mm screws on the side of the drive cage.
[* black] Then remove the drive from the cage.
-[* icon_caution] When removing the screws be careful of how you are holding the drive cage as to not let the drive fall out while unscrewing.
+[* icon_caution] When removing the screws, be careful of how you are holding the drive cage to prevent the drive from falling out while unscrewing.