#3단계의 변경 사항
Sam Goldheart- 에 의해 수정
편집 승인됨 완료자 Sam Goldheart
- 이전
- 이후
- 변경 사항이 없습니다
단계 라인
[* black] Use the flat end of a spudger to "walk" the LCD cable connector (labeled J19 in the service manual) out of its socket. |
[* black] Press first on one side of the connector, then the other to push it free. Be sure to press the connector itself, '''not''' the socket on the motherboard. |
[* black] Pull the cable straight out of its socket. |
이미지 1
이전 이미지 없음
추가
이미지 2
이전 이미지 없음
추가
이미지 3
이전 이미지 없음
추가