주요 콘텐츠로 건너뛰기

#1 단계의 변경 사항

Henry Lee- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] First Start by turningNow that the PSP over, UMD Drive up.
[* black] Then using a small flat-head, Pry
LCD is removed, unscrew the lower left corner up.
[* black] The right side will come out after the left latch is free. Some jiggle work might be needed, no excessive force
two screws in red.
[* black] First Start by turningNow that the PSP over, UMD Drive up.
[* black] Then using a small flat-head, Pry
LCD is removed, unscrew the lower left corner up.
[* black] The right side will come out after the left latch is free. Some jiggle work might be needed, no excessive force
two screws in red.

이미지 1

이전 버전

새로운 버전