Xbox Series X/S Wireless Controller Joystick Replacement 단계 #6 기록

#6단계의 변경 사항

편집자 Arthur Shi- 2024년 11월 26일

편집 승인됨 완료자 Arthur Shi

	[* icon_note] For full instructions on how to desolder through-hole solder joints, [guide\|750\|click here\|stepid=4052\|new_window=true].
-	[* black] Set your soldering iron to 375 °C and ~~use it~~ to ~~melt one of the solder joints~~.
+	[* black] Set your soldering iron to 375 °C and press the tip against a joint to heat it.
	[* icon_caution] Don't heat the joint longer than 15 seconds at a time, or you risk damaging the solder pad.
-	[* icon_note] If you're having trouble melting the solder joint, apply some ''leaded solder'' onto your soldering iron tip and try again. ~~This will help~~ with heat transfer while lowering the melting temperature of the existing lead-free solder joint.
+	[* icon_note] If you're having trouble melting the solder joint, apply some ''leaded solder'' onto your soldering iron tip and try again. The leaded solder helps with heat transfer while lowering the melting temperature of the existing lead-free solder joint.
	[* black] Once the joint's molten, [guide\|142538\|use a desoldering pump\|new_window=true] to suck away the solder.
	[* black] Repeat the heating and sucking procedure a few times ''on the same joint'' to remove as much solder as possible.