#8단계의 변경 사항
편집자 Arthur Shi-
편집 승인됨 완료자 Arthur Shi
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* icon_note] This step shows how to remove solder residue with a solder wick. ***If the potentiometer feels loose, skip this step.*** |
|---|---|
| + | [* black] Apply flux to the solder joint. |
| + | [* black] Lay a piece of clean solder wick over the solder joint. |
| + | [* black] Press the tip of your soldering iron over the wick so that the residue melts and transfers into the wick. |
| + | [* black] Repeat the process with the remaining solder joints. |