#9단계의 변경 사항
편집자 Arthur Shi-
편집 승인됨 완료자 Arthur Shi
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Pull the potentiometer away from the board and remove it. | |
| - | [* icon_note] Don't pull excessively, or you'll rip out a solder pad. If the potentiometer feels stuck, follow the previous steps to try to remove any remaining solder residue. |
| + | [* icon_note] Don't pull excessively, or you'll rip out a solder pad. If the potentiometer feels stuck, follow the previous three steps to try to remove any remaining solder residue. |
| [* icon_note] You can also try heating each joint as you wiggle the potentiometer out of the board. This is best accomplished with extra helping hands. |