#17단계의 변경 사항
편집자 Arthur Shi-
편집 승인됨 완료자 Arthur Shi
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* black] Secure the circuit board so that the solder joints face upward. |
|---|---|
| + | [* black] Use your soldering iron to heat a solder joint holding one of the frame leg remnants. |
| + | [* black] Once the solder is melted, use tweezers to grasp and pull the frame leg remnant out of its through-hole. |
| + | [* black] Repeat the procedure to remove the remaining three frame anchors. |