#17단계의 변경 사항
편집자 Arthur Shi-
편집 승인됨 완료자 Arthur Shi
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Secure the circuit board so that the solder joints face upward. | |
| [* red] Use your soldering iron to heat a solder joint securing one of the frame anchors. | |
| [* black] Once the solder is melted, use tweezers to grab and pull the frame anchor out of its through-hole. | |
| + | [* icon_note] If you're having trouble melting the solder joint, apply some leaded solder onto your soldering iron tip and try again. |