#28단계의 변경 사항
편집자 Arthur Shi-
편집 승인됨 완료자 Arthur Shi
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Flip the circuit board over and secure it so that you can solder the joystick module pins. | |
| [* black] Apply flux to first few solder pads that you're going to solder. | |
| [* black] Solder one of the pins to the circuit board. | |
| [* icon_note] It may be helpful to solder one of the frame anchors first, so that the joystick will be more stable to work on. | |
| - | [* black] Make sure that the joystick module hasn't moved out of position. Reheat the soldered pin and reposition the module as needed. |
| - | [* black] Solder the remaining pins to the circuit board. Apply flux as you solder to help create good bonds. |