#4단계의 변경 사항
편집자 Arthur Shi-
편집 승인됨 완료자 Arthur Shi
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* red] Desolder the eight wires connecting the four motors to the circuit board. |
|---|---|
| + | [* icon_reminder] When you resolder these wires during reassembly, make sure to solder the red motor wires to the pads marked ***SQ3*** and ***SQ7***. This ensures that the large rumble motors are spinning in the correct direction. |