주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Big Tom- 에 의해 수정

편집 거부됨 완료자 Adam O'Camb

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Flip up the retaining flap on the LCD ribbon cable ZIF connector.
-[* black] Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.
+[* black] Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board. The LCD ribbon cable slides gently out of the socket toward the edge of the device.