#1단계의 변경 사항
단계 라인
| + | [* black] Before beginning, remove the battery from the camera. |
|---|---|
| [* black] Underneath the two I/F terminal caps, remove the following screws: | |
| [* red] Three M1.7x5.5mm JIS #000 screws | |
| [* black] Using a plastic opening pick, peel off the front name plate. | |
| [* black] Underneath where the name plate was, remove the following screw: | |
| [* orange] One M1.7x5.5mm Phillips #000 screw |