물건을 수리하세요 커뮤니티 상점

#1단계의 변경 사항

편집자 Zephosk-

편집 승인됨 완료자 Zephosk

이전
이후
변경 사항 없음

단계 라인

[* red] Remove these two cables from the main PCB board using a plastic spudger tool.
+[* orange] Remove the third cable using a pair of blunt tweezers.
+ [* black] Place the end of the tweezers in the small notch in the cable connector and push the connector out.
+[* black] Using a pair of blunt tweezers, carefully pull out the red and yellow cables from the DC PCB board.