메인 컨텐츠로 가기

#1 단계의 변경 사항

vincentjoly- 에 의해 수정

편집 승인됨 에 의해 vincentjoly

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] Remove the two Torx screws to release the lower access panel and set it aside. Verify if there is water in the base and remove as much as you can with a rag (as pictured). It is normal to see a small amount of water in there but if there is a large amount, this may be what is causing the float to remain up and you may have a bigger issue.

이미지 1

이전 이미지가 없습니다

추가되었습니다