메인 컨텐츠로 가기

#1 단계의 변경 사항

vincentjoly- 에 의해 수정

편집 승인됨 에 의해 vincentjoly

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] Remove the two Torx screws to release the lower access panel and set it aside.
[* black]
Verify if there is water in the base and remove as much as you can with a rag (as pictured).
[* black]
It is normal to see a small amount of water in there but if there is a large amount, this may be what is causing the float to remain up and you may have a biggerdifferent issue.
[* black] Remove the two Torx screws to release the lower access panel and set it aside.
[* black]
Verify if there is water in the base and remove as much as you can with a rag (as pictured).
[* black]
It is normal to see a small amount of water in there but if there is a large amount, this may be what is causing the float to remain up and you may have a biggerdifferent issue.