Skip to main content

#1 단계의 변경 사항

Jenalina Santiago- 에 의해 수정

편집 승인됨 에 의해 Jenalina Santiago

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[title] Remove the ribbon cable for the floppy disk drive
[* red] If you have a floppy disk drive, it has a ribbon cable that runs over the heat-sink assembly that must be moved out of the way. To remove it, first unplug it from the system board '''by pulling on plastic pull ring'''.
[* green] The ribbon cable is fastened to the heat-sink assembly with four clips. Simply '''slide the ribbon cable out from under these clips''' and move the cable out of the way.

이미지 1

이전 이미지가 없습니다

추가