메인 콘텐츠로 스킵하기

#2 단계의 변경 사항

Jimfixer- 에 의해 수정

편집 승인됨 에 의해 Jimfixer

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[title] Remove the Heat Sink
[* icon_caution] '''CAUTION:''' Even though the heat-sink assembly has a protective plastic covering, be careful when touching it -- the assembly may still be hot if your PC was just on.
[* green] Release the blue plastic secure lever under the heat-sink assembly by pushing the tab and pivoting the lever down and away from the assembly.
[* red] Remove the two screws located at the top and bottom of the heat-sink assembly using a standard Phillips-head screwdriver.
[* black] Pull the heat-sink assembly off the board as if it were a door with its hinges on the right.
[* icon_reminder] Clean the old thermal paste from the contact points on the heat sink