Skip to main content

#6 단계의 변경 사항

Jimfixer- 에 의해 수정

편집 승인됨 에 의해 Jimfixer

변경 사항이 없습니다

스텝 라인

[title] Reinstall the Heat-Sink Assembly
[* black] Place the heat-sink assembly back on its hinges.
[* black] Pivot the heat-sink assembly back to its original position and secure it with the two screws removed earlier.
[* black] Replace the floppy drive's ribbon cable (if you have one).
[* icon_note] '''NOTE:''' Be sure the heat-sink assembly is seated properly and secured tightly. If it is loose or uneven, it cannot absorb heat properly and could cause your PC to unexpectedly shut down to prevent overheating.
[* icon_reminder] Clean the heat sink before reassembly