주요 콘텐츠로 건너뛰기

#1 단계의 변경 사항

bushing- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] Removeblack] Remove the 6 Phillips headfollowing 7 screws that holdsecuring the back cover in place. There are two under the battery. (In some cases,lower case to the DS Lite:
[* red] 3 tri-wing
screws are tri-head,(silver)
[* orange] 1 tri-wing screw (black)
[* yellow] 2 Phillips screws (gold)
[* blue] 1 Phillips screw (silver)
[* icon_note] Do
not Phillips.)remove the unmarked screw (in the battery compartment); it holds the main PCB in place.
[* red] Removeblack] Remove the 6 Phillips headfollowing 7 screws that holdsecuring the back cover in place. There are two under the battery. (In some cases,lower case to the DS Lite:
[* red] 3 tri-wing
screws are tri-head,(silver)
[* orange] 1 tri-wing screw (black)
[* yellow] 2 Phillips screws (gold)
[* blue] 1 Phillips screw (silver)
[* icon_note] Do
not Phillips.)remove the unmarked screw (in the battery compartment); it holds the main PCB in place.

이미지 2

이전 이미지가 없습니다

추가