Skip to main content

#3 단계의 변경 사항

Brett Hartt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] UsingWhile pushing on the card slots and the headphone jack, use the plastic opening tool,tool to carefully separate the back panel from the rest of the device while pushing on the card slots and the headphone jack.
[* black] UsingWhile pushing on the card slots and the headphone jack, use the plastic opening tool,tool to carefully separate the back panel from the rest of the device while pushing on the card slots and the headphone jack.
[* icon_caution] Be careful of the wires that are on the inside of the device.
[* icon_note] The right and left bumpers tend to fall out when the cover is removed but youremoved. You can prevent this by turning the device over before removing the cover.
[* icon_note] The right and left bumpers tend to fall out when the cover is removed but youremoved. You can prevent this by turning the device over before removing the cover.