메인 컨텐츠로 가기

#4 단계의 변경 사항

Brett Hartt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] Carefully separate the two pieces by hand.
[* icon_reminder] Pay close attention to the orientation of the right and left bumper pins and springs. Installing the springs in the same manner as they were removed will cut down on reassembly time and frustration.
[* icon_caution] When putting the top and bottom half back together, make sure that the power switch cover on the bottom housing piece is in the off (down) position. OtherwiseOtherwise, the power switch cover can break the very fragile power switch upon reassembly.
[* icon_caution] When putting the top and bottom half back together, make sure that the power switch cover on the bottom housing piece is in the off (down) position. OtherwiseOtherwise, the power switch cover can break the very fragile power switch upon reassembly.