주요 콘텐츠로 건너뛰기

#7단계의 변경 사항

Jonathan Oyan- 에 의해 수정

편집 승인됨 완료자 Jonathan Oyan

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Insert the plastic opening tool into the top of the rear panel to separate the 2 pieces of the rear panel.
-[* black] Firmly slide the plastic opening tool all around the rear panel. The 2 pieces of the rear panel are attached with snaps.
+[* black] Insert the plastic opening tool into the groove at the top of the rear panel.
+[* black] Firmly slide the plastic opening tool all around the rear panel. The panel will audibly snap as it comes apart.
[* icon_note] These 2 pieces are attached well, so a significant amount of force is needed to separate them.