주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#2단계의 변경 사항

Nicolas Siemsen- 에 의해 수정

편집 승인됨 완료자 Nicolas Siemsen

이전
이후
변경 사항이 없습니다

단계 라인

[* black] ConnectorWith your hand vacuum pump connected to the solid yellow line, with no stripesstripes, you can continue. Go to your driver's door, which should be close at this time, and turn the key in the door the the unlock position. Pull a vacuum of 10 to 15Hg; all the doors on the car should unlock. Wait about 5 minutes to see if the unlock side of the system holds.
[* black] ConnectorWith your hand vacuum pump connected to the solid yellow line, with no stripesstripes, you can continue. Go to your driver's door, which should be close at this time, and turn the key in the door the the unlock position. Pull a vacuum of 10 to 15Hg; all the doors on the car should unlock. Wait about 5 minutes to see if the unlock side of the system holds.
[* black] With your hand pump still connected to the solid yellow line, move the key in the driver's door to the locked position. Pump vacuum again at 10 to 15Hg. The doors should all lock. Leave this vacuum again for about 5 minutes. Make note of the result.
[* black] With your driver's door panel removed you can watch one of the actuators during this process. Pictured are the early style actuators. The first picture shows the door in the locked position while the second shows it unlocked.

이미지 2

이전 이미지 없음

추가

이미지 3

이전 이미지 없음

추가