주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#17단계의 변경 사항

Nicolas Siemsen- 에 의해 수정

편집 승인됨 완료자 Nicolas Siemsen

이전
이후
변경 사항이 없습니다

단계 라인

[* black] If you found a leak in the line noted in Step 15, serving the trunk and gas door locks, you will need to go to the back of the car and open the trunk to proceed.
[* black] To test the trunk lock actuator you will first need to remove the black plastic cover plate that covers the recess in the rear body panel that the actuator is installed into. Once it is removed you will see the trunk actuator. Pull the red line from the actuator, as this indicates the lock side, and pull a 10 to 15Hg vacuum.
[* black] Check for a leak. If it is leaking, you will need to replace the actuator or try and find a replacement diaphragm to repair it.

이미지 1

이전 이미지 없음

추가