주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#6단계의 변경 사항

iRobot- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Peel up the two pieces of foil tape on the left side of the keyboard area.
[* icon_caution] The connectors at the ends of the cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.
[* black] Carefully disconnect the microphone and power cables from the logic board. Using your fingernails or a dental pick, carefully pry the connectors from their sockets. Make sure you're pulling only on the connector and not on the socket.

이미지 1

이전 이미지 없음

추가